HDB Fire Rated Doors in Singapore – Professionally Installed with HDB Permit

After purchasing a fire rated door from Ho Ho, we will apply for the HDB renovation permit on your behalf at no additional cost. This ensures your installation complies with HDB regulations.

✅ Here’s how the process works:

1) Onsite Measurement

2) Document Submission

3) Permit Application by Ho Ho We’ll submit your application directly to HDB and follow up until it’s approved. Once approved, HDB will notify you via SMS.

4) Installation and Inspection After installation, a third-party inspector will visit within 3–6 months to check the door, door closer, lockset, and smoke detector. Upon successful inspection, you will receive:

• An accreditation sticker on the door

• A fire rated certificate

📌 Note: If no one contacts you within 6 months post-installation, please inform us so we can follow up with the inspection team.

To apply for an HDB fire rated door permit, two key documents are required:

1) Original HDB Floorplan This must be the official floorplan issued by HDB—not one drawn by your interior designer or contractor. ➤ If you don’t have a copy, you can purchase it from the HDB website for just $5, or let us handle it for you at the same cost.

2) HDB Acknowledgment Form This form must be completed and signed by the flat owner. We will provide this form during your order process, or you may download it from our website or the HDB portal.

1) HDB Renovation Permit (Soft Copy)

• You may request the soft copy from us.

• Alternatively, you can log in to the HDB Portal using your Singpass to retrieve it.

• Note: HDB no longer issues hard copies for environmental reasons.

2) Accreditation Sticker

• This sticker is affixed to your fire rated door by a third-party inspector to certify compliance.

3) Fire Rated Certificate

• Official document confirming that your door meets SCDF and HDB fire safety requirements.

According to HDB fire safety regulations, all approved fire rated doors must be installed with three essential safety components:

1) Stainless Steel Mortise Lock

This lock is heat-resistant and tarnish-free, ensuring long-lasting durability and secure performance—even during high-temperature emergencies.

2) Fire Rated Door Closer (Self-Closing Device)

A door closer ensures that the fire rated door automatically shuts after being opened. This is critical to prevent the spread of smoke and flames through corridors and escape routes.

3) SCDF-Recommended Smoke Detector

The smoke detector is vital for early fire detection, alerting you and your neighbors before flames spread—giving everyone more time to evacuate safely.

1. Send Us a Photo of Your Existing Door

A clear photo helps us understand your current setup, door swing direction, and frame compatibility.

2. Provide Measurements (For Condo or Landed Properties)

If you're not in an HDB flat, please include:

• Width

• Height

• Thickness of your existing door - These dimensions help us quote accurately, as non-HDB units don’t follow standard sizes.

3. Mention Exposure to Sun or Rain

Let us know if your door is exposed to the elements. This affects the choice of finishing—varnish doors are ideal for outdoor exposure, while laminate doors are best for indoor use.

4. Interested in a Gate or Digital Lock Too?

We offer bundle promotions when you combine a fire rated door with a mild steel gate or digital lock—just let us know what you're considering.

5. Visit Our Showroom (Optional, but Recommended)

Drop by our showroom at 194 Pandan Loop #07-07 Singapore 128383 to view door samples in person, feel the materials, and get expert advice. Whatapps us 96319288

The typical lead time for a fire rated door from Ho Ho is approximately 3 weeks from the order date. This includes:

• Measurement appointment

• HDB permit application

• Door fabrication

• Scheduling of installation

Once the HDB permit is approved, we’ll proceed with fabrication and contact you to arrange a convenient installation date. Installation itself usually takes about 2 hours.

If you’ve selected a varnish fire rated door, varnishing will be done the day after installation to allow proper drying and finishing.

1. Varnish Fire Rated Door – Best for Outdoor Exposure

• Finish: Natural wood grain with a classic, rustic look

• Pros: Most affordable, re-varnishable over time

• Best for: Doors exposed to sunlight or rain, as they can be easily refinished

2. Laminated Fire Rated Door – Modern & Low Maintenance

• Finish: Durable laminate in trendy colours (Muji white, matte black, ash grey, woodgrain)

• Pros: Scratch-resistant, no revarnishing needed, modern aesthetics

• Cons: Higher cost, but long-lasting

• Best for: Indoor use in new BTO flats, condos, or minimalist interiors

Proper care is essential to ensure your fire rated door continues to perform safely and looks its best over time. Follow these simple maintenance and cleaning steps:

Cleaning Guidelines

• Dust the surface regularly with a soft, dry cloth.

• For deeper cleaning, use a damp cloth or wet wipes.

• Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.

Maintenance Guidelines

• Lubricate the door hinges every few months with WD-40 or a similar lubricant to prevent squeaking and ensure smooth movement.

• Check the lockset and door closer periodically. Tighten any loose screws and replace parts if they show signs of wear or malfunction.

By following these steps, you help extend the lifespan of your fire rated door.

If your fire rated door is difficult to open or doesn't close properly, it’s usually due to alignment or hardware issues. Here’s how you can troubleshoot and resolve the problem:

Check the Hinges

• The most common cause is loose hinge screws, especially at the top hinge.

• Use a screwdriver to tighten all the screws. If the screw holes are worn out, consider using longer screws or filling the holes with wooden plugs for a tighter grip.

Check for Obstructions

• Inspect the door frame and threshold for debris or warping that might be affecting the door’s swing or seal.

Check Door Alignment

• If the door appears misaligned or rubs against the frame, hinge adjustment may be needed. In some cases, professional re-hanging or frame repair may be required.

Proper hinge tension and frame alignment are essential to maintaining the door’s ability to close and seal effectively in the event of a fire.

If your fire rated door is slamming shut or failing to close all the way, the issue likely lies with the door closer mechanism. This component controls the speed and force of the door as it shuts.

Adjust the Door Closer

• Locate the speed-setting valves on the door closer (usually marked as "sweep" and "latch" adjustments).

• Use a screwdriver to turn the valves slightly—clockwise to slow the speed, counterclockwise to increase it.

• Adjust in small increments and test the door after each adjustment.

Check for Obstructions or Warping

• Make sure there’s nothing blocking the door from closing fully.

• If the frame or door is warped, professional realignment or replacement may be needed.

Adjusting the door closer helps ensure your fire rated door complies with safety standards by closing securely and safely after every use.